admin58 – Page 2 – CJ ROMBOLD

June 9, 2023 0

1966 HEMI

This 1966 Chrysler HEMI came in for a stock restoration. We did add a mild cam in the process and yes those are stock Carter AFB 625 cfm carburetors. The owner has ordered new exhaust manifolds as part of the restoration. During break in pulls this 426 made over 425 HP & 467 TQ @…

admin58

May 18, 2023 0

496 Chevrolet

This Big Block Chevy was built with a Scat Rotating Assembly, Hydraulic Roller Cam, Liberty Aluminum Heads, Edelbrock Performer Intake, Holley Carburetor, and a PerTronix Ignition System. Made 574 HP & 616 TQ. See a DYNO pull on our Facebook page.

admin58

April 19, 2023 0

427 Ford

One of our good Drag Racing customers came in for some improvements. We started with a Dart Block and added a Scat Crankshaft and Rods. Next we added a Bullet Cam and Diamond Pistons. Top this all off with Higgins Racing Heads and Intake. We are looking forward to putting this 427 on the Dyno.…

admin58

March 18, 2023 0

383 Supercharged

We are building this engine for a good customer of ours for a 57 Chevy street car. We started with a Dart Block and added a Scat Rotating Assembly. Next is a Crower Hydraulic Roller Cam and a set of Brodix Heads top that off with a B & M 471 Supercharger and get ready…

admin58

March 7, 2023 0

Chevrolet 427

This 427 Chevy was rebuilt using Pro-Filer Heads, Crower Solid Roller Cam, and a Brawler 850 Carburetor. We will try to post Dyno numbers soon! Thanks for checking in!

admin58

January 26, 2023 0

Not Stock 292

Stock these 292 Chevrolet six cylinders had 8 to 1 compression and made around 147 HP. We bumped up the compression to 10 to 1 and added a few go fast items. Custom forged pistons, Crower custom cam, ported cylinder head, Offenhauser intake, 600 Brawler carburetor, custom header, and an electronic ignition just to name…

admin58

January 19, 2023 0

1950 Ford Flathead

This 1950 Ford Flathead is in for a stock rebuild. In 1950 the Ford Flathead was 239 CI and had a 3.750 stroke and made 100 HP. The Mercury Flathead was 255 CI with 4.000 stroke and made 110 HP. In the early days of Hot Rodding some builders would use the Mercury crankshaft in…

admin58

January 7, 2023 0

1966 Corvette Rebuild

This 427 came in for a stock rebuild. It has a GM Dual Plane intake and we installed a bigger hydraulic roller cam giving this engine a bit more performance but keeping it easy to drive on the street.

admin58

December 17, 2022 0

Pontiac 400

This Pontiac 400 came in for a stock rebuild. Some folks may not know that back in this time period Pontiac had their own engine program. This 400 has a Edelbrock Intake and Valve Covers along with a Holley 750 Carburetor for a little added performance and style. These engines produced around 300 HP in…

admin58

November 3, 2022 0

Six Cylinder Chevrolet

As we are known for our race & hot rod engines we also do stock restorations which include this straight six painted GM orange.

admin58